Re: K3 and N1MM

Posted by Brett Howard on
URL: http://elecraft.85.s1.nabble.com/K3-and-N1MM-tp3276894p3278878.html

Is there a way to use the internal keyer in the K3 with N1MM or do you
have to use the DTR/RTS in the key jack method.  I run windows in a
virtual machine under linux which makes the Windows timing even more
grossly disgusting for keying.  It certainly seems like the K3s keyer
should be able to work a lot like a win keyer and just have everything
in one box but I've been unable to pull it off.  Not sure if its a
problem with the virtual machine setup or what...

So should I be able to get that to work fairly easily if I wasn't
running the virtual machine?  If so I just need to know that and I'll
find the problem in the UART passthrough in Linux...  Or should I go and
buy this lil kit:
http://k1el.tripod.com/WKUSB.html

(or is there a better kit that I should be looking at?)

~Brett

On Fri, 2009-07-17 at 19:52 +0200, Richard Meilstrup wrote:

> Thanks a lot to N6ML, N0SS, and N4XD for advice. I have now N1MM running
> beautifully on CW, and the same goes for the CW-machine in Logger32.
> Rick, OZ5RM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html