K2 Power meter

Posted by TJ Campie on Jul 20, 2009; 1:53am
URL: http://elecraft.85.s1.nabble.com/K2-Power-meter-tp3286522.html

This has been beaten over and over I think but I haven't found  
anything on it yet:

I just got back from the lab at work and used a very well calibrated  
power meter to calibrate my KAT2 power meter.  Now on 40m at home, I  
set my power control to 5w and tuner to Pout.  The tuner now reads  
2.9w.  Not until I tune the requested power to 8 watts or so does the  
tuner say I'm putting out 5 watts.  Isn't there a way to adjust it so  
that the requested power matches the tuner output power so that the S/
Power meter reads the right value?  That's the most annoying part...

Tom
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html