Re: KX1 RX problem
Posted by
Don Wilhelm-4 on
Aug 02, 2009; 11:17am
URL: http://elecraft.85.s1.nabble.com/KX1-RX-problem-tp3371163p3372351.html
Pierre,
That is a strange combination of bands to produce a problem.
My guess is that you have either a faulty relay contact or a bad solder
connection/toroid lead in the KXAT1. Perhaps a relay contact that
makes contact until you pass RF through it.
You could try the last two troubleshooting steps shown on page 11 of the
KXAT1 manual.
73,
Don W3FPR
Pierre wrote:
> A new problem is affecting my KX1 (#442). If I tune on 40, 30 and 20m, the KXAT1 finds a correct match on all three bands, and after tuning, signals on RX are loud and clear.
>
> But after, as soon as I touch the paddle on 30 or 20, the RX signals drop considerably on these bands; but that problem don't appear on 40 m.
>
> Any clue?
>
> Thanks de Pierre VE2PID
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html