W1 - Power readout Low

Posted by David Heinsohn on Aug 08, 2009; 1:33am
URL: http://elecraft.85.s1.nabble.com/W1-Power-readout-Low-tp3407662.html

  I recently built a W1.  It worked fine both via the LEDs and remotely
via the puter.  About a week ago the indicated output power dropped such
that it always shows less than 1.4w.  The selected output on the K2 is
5w.  My old analog 200w scale power meter still shows about 5w as it did
when the W1 was agreeing with it.  Any ideas what's changed that might
cause this?  I've looked at the manual and checked the settings on the
remote program.  Even locked the W1 to the 14w scale with no effect.

TNX
de
kd0r
David

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html