Posted by
Jim Brown-10 on
Aug 09, 2009; 5:32pm
URL: http://elecraft.85.s1.nabble.com/K3-Filter-Ring-with-Noise-tp3410069p3413415.html
On Sat, 08 Aug 2009 22:35:42 -0700, Brett Howard wrote:
>I liked Joe's comment about it being spaced over more bandwidth. Thats
>an interesting thought but based on the whole logarithmic scaling stuff
>it does make sense.
While Joe is rarely wrong, he is wrong about this, and Lyle is right. In
nature (that is, at the input of your K3) the noise voltage is spread out
over frequency. When you narrow down the IF, you receive less of that noise.
As you widen the filter, the noise rises in direct proportion to the
bandwidth. So when you narrow the filters, you are improving the signal to
noise ratio.
The fundamental problem of narrowing the filter is a psychoacoustic one --
that is, the ability of the human ear/brain being able to separate signal
from noise. When you narrow the filters, the only noise you hear has the same
frequency components as the signal, so the brain is trying to separate signal
and noise that are very close to the same pitch.
BUT -- human hearing is logarithmic, both in pitch and amplitude. Our ability
to separate frequencies is based on proportional differences in frequency, so
setting the CW pitch to a lower frequency gives the ear greater ability to
separate signals (or signal and noise) that are close together in frequency.
That is, if the pitch is set to 500 Hz, 100 Hz bandwidth is 20% of the signal
frequency, whereas at a pitch of 1 kHz, 100 Hz bandwidth is only 10%. I know
some really good CW operators (N6RO is one) who regularly work at pitches
below 500 Hz for this reason.
BTW -- I know exactly what the original poster of this thread is talking
about -- I really suffered from it when I lived in Chicago.
73,
Jim Brown K9YC
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html