Re: K3 Filter Ring with Noise?

Posted by drewko on Aug 10, 2009; 4:44pm
URL: http://elecraft.85.s1.nabble.com/K3-Filter-Ring-with-Noise-tp3410069p3418396.html

On Sat, 08 Aug 2009 22:35:42 -0700, ~Brett wrote:

>
>One thing to try is to turn the bandwidth down to around 200Hz and find
>a quiet spot on the band then adjust your pitch up and down and listen
>to the band noise in a few places to see what you prefer based on the
>noise rather than the pitch.  Then see if you can live w/ that pitch.
>

Yes, but that is very tedious. Much better would be the ability to
adjust the pitch of signals while you are listening to them.

Unfortunately, when PITCH is on, received signal audio is blocked,
even if you set the pitch volume to zero. It would be very nice to be
able to  interactively adjust a CW signal's pitch for optimum copy
under current conditions of QRM and QRN, without detuning the VFO or
RIT.

73,
Drew
AF2Z



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html