Re: Case for noise generator

Posted by David Gilbert on Aug 22, 2009; 9:03am
URL: http://elecraft.85.s1.nabble.com/Case-for-noise-generator-tp3490650p3494516.html



Actually, you should be able to cut a hole on the end by carefully
carving a relief channel in the wood for the rolled lip.  You'd probably
need to be a bit more careful, though, since the rolled lip isn't solid
inside and the metal would be somewhat more likely to tear there.

By the way, I've never tried it but I suspect you'd be able to cut a
hole in almost any irregular surface by casting the material in
something hard that can be later softened or dissolved ... like drywall
plaster or hard candy.

73,
Dave   AB7E



David Ferrington, M0XDF wrote:
> Good idea David and one I'll bear in mind, but you can't clamp like
> that into an Altoids tin, because it has a rolled lip, come to think
> of it, would a 1/2 hole go in the side? Great idea though Joe
> 73 de M0XDF, K3 #174
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html