http://elecraft.85.s1.nabble.com/K3-Channel-Hopping-tp3482263p3498105.html
I agree that this would be nice... Such that if you overwrite a memory
original state. I mentioned this before and I think Wayne mentioned it
> Another needed feature is a "remember and revert to the way the radio was just before accidentally hitting the V>M button instead of the M>V button."
>
> --- On Fri, 8/21/09, Dave G4AON <
[hidden email]> wrote:
>
> From: Dave G4AON <
[hidden email]>
> Subject: Re: [Elecraft] K3 Channel Hopping
> To:
[hidden email]
> Date: Friday, August 21, 2009, 7:55 AM
>
> So long as they remember to keep rapid tune via the RIT knob function
> set to not round off the frequency (VFO OFS menu item), this can lead to
> the accidentally loss of a contact on CW.
>
> 73 Dave, G4AON
> K3/100 #80
> ----------------------
>
> Another thing it does and that I suggested for the K3 is this:
>
> With both RIT and XIT "Off" change the function to force the frequency
> to the nearest whole number value on the first step. For example if
> the current frequency is 14.201 MHz and the coarse tuning steps are 5
> KHz, then the first step would be to either 14.200 or 14.205 (depending
> on direction) then the following steps would be to 14.210, 14.215... if
> tuning up or 14.195, 14.190...if tuning down.
>
> On Dec 17, 2008 Richard, AD7FZ, wrote: "Hello Wes, yes this is a good
> idea. I've sent your request off to our software engineers to work on."
>
> Somewhere is a disconnect.
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
>
http://mail.yahoo.com
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html