The most common cause for that symptom is the Low Pass Filters. Do
pass of wire through the center of the core as one turn. I believe you
will find you have one extra turn on the toroids. A straight wire
> Question:
>
> I am finding the following on my QRP K2 with KAT2, cal current set 3.7:
> 20 meters power setting 14.6, current displayed 2.84, CW
> 30 meters power setting 14.6, HI current displayed at CW TX, SWR
> 1.2:1, current 3.74
> 40 meters power setting 14.6, Hi current displayed at CW TX, SWR
> 1.2:1, current 3.72
>
> Should I consider this as OK?
> Or do I have an alignment issue on 30 and 40 meters or some other
> issue I should look into?
> The ant. on 30 is a vert, on 40 and 20 a dipole cut for 40 and 20.
>
> I am in the process adding the upgrade to K2/100 and do not want to
> create smoke.
>
> Thank you for your consideration.
> Best regards
> Dick AD1G
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.80/2349 - Release Date: 09/06/09 05:51:00
>
>