Re: Power point
Posted by
Bill W4ZV on
Sep 15, 2009; 9:47pm
URL: http://elecraft.85.s1.nabble.com/Power-point-tp3651883p3652126.html
> It would be nice to explicitly give the bandwidth associated with the
dynamic range numbers. Most tests I have seen use 500 Hz but.....
> In any case one assumes that all those numbers are obtained with the
same bandwidth, or at least "normalized" to a specific bandwidth.
Without a statement of bandwidth this is just an assumption.
ARRL, RSGB (RadCom), W8JI and Sherwood always use 500 Hz or
the "Closest Available to 500 Hz" (per ARRL Test
Procedure). Sherwood is the only tester who sometimes uses
additional bandwidths but they are always footnoted.
73, Bill W4ZV
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html