http://elecraft.85.s1.nabble.com/re-Poor-performance-on-6M-tp365841p365843.html
weak signals. I am going to measure the MDS to see if it is all OK.
> My experience was just the opposite. I had the K3 and TS-2000 side by
> side and the K3, without any external preamp, heard signals that the
> TS-2000 could not pull out. That was a strange opening. I have an ARR
> 6 meter preamp that I can plug into the back of the K3, but that is
> in the basement. There is one advantage with the TS-2000, in that I
> knew if I was within 30 KHz of K8EB, who is 11 miles away with a
> monster signal! I purposely would get within 5 kHz of him on the K3,
> and never heard him.
>
> I was jumping between my home rig, and my remote base, which is also a
> TS-2000, which is a very easy rig to remote control. But I found my
> local K3 better than either 2000. I ordered my 2nd K3 a while ago, to
> replace the TS-2000 at the six meter remote base.
>
> tom, K8TB
>
>
>> Roger K8RS said,
>>
>
> K3 Group,
> I was looking forward to the ARRL June QSO Party this
> weekend to see how the K3 did on 6M.
> Result: Not very well!
> When a fellow ham called to correct a Grid Square report
> that I had missed, I knew I'd have to switch over to my
> Kenwood 2000 where I could hear much better, The change was
> so dramatic that I was floored. Obviously, we need a lift
> on 6M receive! Transmit seemed fine with solid reports, but
> the weak audio on receive was a severe handicap.
> More later!
>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):