Re: KAT2 INSTALL - VOLTAGE AT U4, PIN1

Posted by KC5CQW on
URL: http://elecraft.85.s1.nabble.com/KAT2-INSTALL-VOLTAGE-AT-U4-PIN1-tp366029p366030.html

Make sure that when you build the 60M board that the diodes are in the right position. I had reversed D1 and it cost me about $200 in parts and repair work! The 2SC1969 finals are very explosive BTW...

Damon

MTcja wrote

After listening for a while and reviewing basic and advanced operation I am now beginning the install of the K2 accessories.  For the KAT2 I am getting .001 V at U4/PIN 1.  Is this "close enough" to zero?  If not, please advise the best way to trace back the origin of this voltage.  BTW, in TUNE I am at 3.8.  Thanks.  

Chris
K7CJA
K2#6442