Posted by
Sarah K. on
Nov 24, 2007; 2:47am
URL: http://elecraft.85.s1.nabble.com/K2-AGC-Threshold-Too-Low-tp367004p367010.html
Well, I searched around a bit and found *another* cheap DMM, which
seels to be reading about 0.12 to 0.14 volts higher than the first
one. Now I don't know which one to believe! :-)
("Carry one watch, or three, but never two...")
Now I need to find my *other* other meter, the analog one I got when I
was nine years old, and see what it thinks...
Sarah AF6FH
On Nov 23, 2007 4:47 PM, Ron D'Eau Claire <
[hidden email]> wrote:
> Hi and welcome!
>
> It doesn't happen too often, but have you checked the accuracy of your
> "cheap" DMM? If you don't have anything to compare it with, you can get an
> idea of its condition by measuring the voltage across a fresh alkaline
> battery. It should read about 1.57 and 1.58 VDC.
>
> Ron AC7AC
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com