Posted by
wayne burdick on
Jun 15, 2004; 5:33pm
URL: http://elecraft.85.s1.nabble.com/Application-Note-KX1-S-meter-calibration-procedure-tp367815p367816.html
On Jun 14, 2004, at 6:50 PM, David Toepfer wrote:
> This procedure got an initial nod from Wayne so I am posting it to the
> list for
> broader peer review as it were...
Thanks, David. To anyone attempting this procedure:
- Calibrating the S-meter is a bit tedious by whatever method you use.
I hope to make the KX1's S-meter much easier to calibrate in the
future.
- It's likely that only a very small range of S-meter menu parameter
values will be usable, since they depend only on the accuracy of the 5-
and 6-volt regulators. So a faster method might be to start with the
average values used by all builders, then tweak them up/down over a
very small range.
- Clearly, the S-meter function of the KX1 is secondary in importance
to the rig's other features. There are only six bars, limiting its
utility no matter how well you calibrate it.
73,
Wayne
N6KR
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
http://mailman.qth.net/mailman/listinfo/elecraftYou must subscribe to post.
Subscriber Info (Addr. Change, Unsub etc):
http://mailman.qth.net/subscribers.htmElecraft page:
http://www.elecraft.com