K2 Frequency Calibration

Posted by Linden, Mike (BRC-Hes) on Jul 07, 2004; 4:12pm
URL: http://elecraft.85.s1.nabble.com/K2-Frequency-Calibration-tp368579.html

  I've found that using the frequency calibration method in which you switch
between LSB/USB when monitoring the tone (tuning for the point at which
there is the least difference in the WWV tone between LSB and USB) on WWV at
15 or 20 MHz works very well on my Kenwood TS-930S. Given the fact that the
K2 has independent BFO settings for LSB/USB, can this method be accurately
used to check the K2's display frequency against WWV?

  Thanks, Michael N9BDF


PS  The "Amateur Radio Emergency Communications Consistency Act" (HR 1478)
and the "Amateur Radio Spectrum Protection Act" (HR 713 & S. 537) are in
Congress. Please contact your Congressmen to ask for their support of these
bills! See the following ARRL link for details:
http://www.arrl.org/govrelations/ <http://www.arrl.org/govrelations/>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com