Re: K2 ALC Anomaly Using PTT

Posted by Eric Swartz - WA6HHQ on
URL: http://elecraft.85.s1.nabble.com/K2-ALC-Anomaly-Using-PTT-tp369950p369952.html

Hi Roy,

This is not true. The K2's internal ALC is ALWAYS active on PTT closure,
regardless of where the K2 meter is set.

There is no issue with linearity or overdriving an external linear. If
anything, we are conservative after power up or a band change and err
initially on the low side at the beginning of your first transmission.

Just to make sure, I had Gary check this on his K2/100 a few minutes ago
and everything is OK..

If you think you have a problem with your K2, please email Gary at
[hidden email] and he will help figure out what is happening.

73, Eric   WA6HHQ
Elecraft

[hidden email] wrote:

>Anyone who uses a K2/100 with a linear needs to know that the K2 ALC does not
>kick in if PTT is used and the K2 display is in the RF mode.  This can cause
>the input to the linear to be overdriven.  This condition can also cause the
>K2 output not to be linear.  It is necessary to put the K2 in ALC mode to
>activate the ALC in PTT.  Once the ALC has been activated, it can be changed back
>to the RF mode.  If the K2 display is in the RF mode when using PTT, it is
>necessary to access the ALC mode each time the sideband or band is changed.  Roy
>Morris  W4WFB
>
>
>  
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com