RE: key down voltage drop
Posted by
Bob Boehmer on
Sep 16, 2004; 5:47pm
URL: http://elecraft.85.s1.nabble.com/key-down-voltage-drop-tp370350p370353.html
Reggie -
That is really dependent on two things: the power supply design and the
current you are drawing. Are you using the same power supply for both the
ts570 measurement and the k2 measurement? (Also if you have a light gauge
wire between the power supply and the k2 and are using the K2 voltage
display for your measurement you will be getting some drop across the wire.)
73,
Bob, WB3FXC
> What is the normal voltage drop on a power supply 13.4 volts
> with a k2 at 15
> watts output? My power supply drops to 12.1 volts. My ts570
> at 100 watts
> only drops .2 of a volt so I am curious.
>
> Reggie
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com