Low Power ?
Posted by
Larry Dodson on
Sep 19, 2004; 11:27am
URL: http://elecraft.85.s1.nabble.com/Low-Power-tp370386.html
I wonder if my K2 (Serial # 2424 with latest mods and software) is set up correctly and would appreciate comments. Output power with CAL CURR set at 3.0 amps is as below. Increasing CAL CURR to 5 amps makes little difference. I know that the K2 is basically a 10 watt rig and I get more on some bands, but the upper bands do not achieve this. When using the K2 with my KW1000 Linear Amplifier a watt or two makes a difference.
80 Meters = 13.0 watts out
40 Meters = 10.0 watts out
30 Meters = 12.0 watts out
20 Meters = 11.0 watts out
15 Meters = 8.0 watts out
12 Meters = 9.5 watts out
10 Meters = 7.0 watts out
Thanks in advance for your advice - Larry (G0IKE)
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com