Re: Low Power ?
Posted by
Mike Harris-9 on
Sep 22, 2004; 1:47pm
URL: http://elecraft.85.s1.nabble.com/Low-Power-tp370386p370389.html
G'day,
> No, not twisting. Interleaving is simple. Pass one wire through each
> hole, then pass the other wire through each hole. Keep alternating
> until all the windings are done. As I remember, one winding has more
> turns, so start with that wire first.
>
> This is different from the original manual, which suggests you wind one
> layer, then the other.
Well this seems overly complicated. What has changed? #1400 has been
throbbing at full power 10W+ on 10 metres since day one.
Another suggestion I have made is not to try and align the BPF's with the
built in power metering. Much easier to get it on the nose with an
external analogy meter like the WM-2 or similar. The meter swing is so
much easier to interpret than dancing digits.
Regards,
Mike VP8NO
#1400
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com