Re: K2 Alignment
Posted by
Don Wilhelm-3 on
Oct 06, 2004; 1:47pm
URL: http://elecraft.85.s1.nabble.com/K2-Alignment-tp370749p370754.html
Confusion reigns!!!
There are 2 articles on the Elecraft website about setting C22. One is old
(it even says 'updated', but says to run CAL PLL on all bands - don't use
that one!!
Instead, download the Frequency Calibrating the K2's 4 MHz Master Oscillator
(C22).pdf article in the "What's New" section of the Builder's Resource
area -- THAT IS the N6KR method that you need. Wayne's original posting
content is on my website too www.qsl.net/w3fpr.
I guess Eric missed deleting the old procedure when the new one was posted.
Forgive him, he has a lot of stuff going on.
73,
Don W3FPR
----- Original Message -----
Egad! Thanks for catching that error Mike!
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com