Re: Check Your Buttons [switch current is _not_ too low]

Posted by .hank. on
URL: http://elecraft.85.s1.nabble.com/Re-Check-Your-Buttons-switch-current-is-not-too-low-tp3707851p3709272.html

AD6XY wrote

My K3 has sometimes had problems with switches too, but only rarely. My K2 is much worse in this respect.

Have we found any user applications for the connector on the bottom of the panel yet?

At least on the K2 with it's bouncing switches it is not only a known problem, especially with the A/B and A=B switches, but you can fairly easily replace them - I changes out about 20 of them on my two K2s.  And you get some physical feedback on the K2.  On the K3 that is not true.