Re: Check Your Buttons [switch current is _not_ too low]

Posted by Mike S-8 on
URL: http://elecraft.85.s1.nabble.com/Re-Check-Your-Buttons-switch-current-is-not-too-low-tp3707851p3709538.html

At 06:54 PM 9/24/2009, .k8dd. wrote...
>At least on the K2 with it's bouncing switches it is not only a known
>problem, especially with the A/B and A=B switches, but you can fairly
>easily
>replace them - I changes out about 20 of them on my two K2s.

K2 switches are readily available from Mouser and Digikey (Elecraft,
too, obviously). E-switch TL1100F160Q. I mention this because it's an
easy thing to add on to an order, and it's handy to keep some spares.

A couple of other common parts:
Potentiometers, 9mm snap in - Alpha 9mm (mouser 317-2080F-5K,
317-2090F-5K)
Headphone jack - Kobiconn 161-3503-EX


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html