Re: K2: Low 10M Output
Posted by
David Pratt-3 on
Oct 26, 2004; 7:22am
URL: http://elecraft.85.s1.nabble.com/K2-Low-10M-Output-tp371088p371090.html
The K2 specification in the manual states that the band is 28.0 to
28.8MHz, Michael. Because of the design of the band pass filters,
transmitting outside that range will result in a lower power output.
I would say that your K2 is operating within spec.
73
David G4DMP
In a recent message, Michael J. Linden <
[hidden email]> said....
> I've just completed the alignment procedure for my K2 and now find
>that the radio can not achieve 10w across the 10m band.
.....
>11.2w @ 28,200 kHz, 2.5A
>6.9w @ 29,000 kHz, 1.9A
>1w @ 29,700 kHz, 0.96A
--
+-------------------------------------------------+
| David M Pratt mailto:
[hidden email] |
| Home Page:
http://www.kippax.demon.co.uk |
+-------------------------------------------------+
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com