Re: K2: Low 10M Output

Posted by Tom Arntzen on Oct 26, 2004; 1:54pm
URL: http://elecraft.85.s1.nabble.com/K2-Low-10M-Output-tp371088p371091.html

This looks pretty the same as I had recently before I installed KPA100.
The drop starts at about 28,700.
If you are over or near 10watts over 28-28,8 range you are OK.
BTW! KPA100 seems to be a bit wider before any drop is noticeable.
Tom LA1PHA

>>11.2w @ 28,200 kHz, 2.5A
>>6.9w  @ 29,000 kHz, 1.9A
>>1w  @ 29,700 kHz, 0.96A
> --
> +-------------------------------------------------+
> |  David M Pratt mailto:[hidden email]  |
> |  Home Page: http://www.kippax.demon.co.uk       |
> +-------------------------------------------------+
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    Help:
> http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com