Re: # 4472 new builder problem

Posted by Mike S-8 on
URL: http://elecraft.85.s1.nabble.com/4472-new-builder-problem-tp371113p371115.html

First, this: http://www.ac6rm.net/mailarchive/html/elecraft-list/2000-08/msg00367.html

Then, if you haven't already, try spreading the turns on T5, if possible. If that doesn't work, rewind T5 with a 15 turn primary, which is what I had to do with 4439.


At 08:42 PM 10/26/2004, jerry wrote...
>Hi to all,
>
>Just finished Part 2 of the basic K2 and having problems with the VCO Alignment.  I set the K2 to 4 mhz and connected a DVM to the left side of R30 and I read 8.0 v and can not change it by adjusting L30.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com