Re: Newbie K2 questions

Posted by N8LP on
URL: http://elecraft.85.s1.nabble.com/Newbie-K2-questions-tp371146p371148.html

It's nice to see some fellow ex-broadcast types on here. I worked in TV
broadcast and later owned a post-production house. I think I've used or
owned just about every AMPEX product ever made dating back to the model
350 audio tape deck, every VTR from the VR-1000 forward except the AVR-3
and VPR-80 (including the high speed tape duplicator of which I think
only three were made). HS-100 & 200 slomo disc recorders, AVA paint
system, several ADOs, ACE editors, Century 330 switchers, etc. Never had
a DCT deck or the storage deck based on it though... we went with
DigiBeta, D1 and D5 at that time.

It was a sad day indeed when AMPEX closed up shop. Without question,
Redwood City was the center of the video universe. A lot of those guys
went on to make more great products like Abekas (we also had a ton of
Abekas equipment).

73,
Larry N8LP



VR2BrettGraham wrote:

> K2TA wrote:
>
>> Oh... The stock knob is gone.   The previous owner had a nice ridged
>> knob with a spinner grip installed on the rig.   But I had an old
>> knob from an Ampex VPR-3 1" broadcast videotape machine whose
>> diameter just meets with the bottom edge of the K2 and only slightly
>> covers the lables for the ATT and A VFO.
>
>
> Darn, I know where there's a VPR-3 here that's not doing anything -
> never would
> have imagined that the shuttle knob would fit a K2.  From Tom's
> description, this
> is a fitting way to recycle bits from the best Type C VTR ever produced.
>
> Alex Poniatoff might even have approved.  ;^)
>
> 73, VR2BrettGraham
> ex-AMPEX HK
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    Help:
> http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com