Re: K2 - Strange Problem ?
Posted by
Mike S-8 on
Nov 30, 2004; 12:18pm
URL: http://elecraft.85.s1.nabble.com/K2-Strange-Problem-tp372185p372192.html
At 01:24 AM 11/30/2004, Stewart Baker wrote...
>problem, but I am back with the noise. It is a shame that there is no way to get
>at the +8V rail on the front panel board as that would be an ideal mic supply.
The Auxbus connection between the RF board and front panel is unused. You could cut the trace on the RF board and use that to bring whatever you want across. I don't know if there are any future plans for a different front panel which might use that line. Alternately, there may be room to add an additional header pin at one end of the RF/FP connection to allow another signal. Worst case, you could airwire it with an inline connector.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com