Re: 160 M Harmonic Problem with K2/100 Driving TenTec Titan

Posted by Stewart Baker on Dec 03, 2004; 10:27am
URL: http://elecraft.85.s1.nabble.com/160-M-Harmonic-Problem-with-K2-100-Driving-TenTec-Titan-tp372264p372266.html


> The K2 has a pin 1 problem at the mic connector and the headphone connector --
> neither of those connector shells touch the chassis if built according to
> instructions.  I
> suspect that there is also a pin 1 problem at the RS232 connector, but
> haven't looked at
> that yet. I've fixed the pin 1 problem at the mic connector.

>> Hi Jim,
>> I am interested in how you fixed the "pin1" problem on the K2 mic connector.
>> The only mod that  I am aware of to addresses this is connecting the socket
>> shell to the Front panel board earth plane. As you comment this can cause
>> an interference voltage to be developed across the board circuitry.

>> 73
>> Stewart G3RXQ

> BTW -- lots of ham gear has pin 1 problems, including all the TenTec gear
> I've looked
> at.
> Thanks to those who have responded re: instability in the K2/100 power amp
> stage. All
> ideas are appreciated.
>
> Jim Brown  K9YC
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com