KPA100 TR Switch isolation problem
Posted by
Robert Friess on
Dec 06, 2004; 5:37pm
URL: http://elecraft.85.s1.nabble.com/KPA100-TR-Switch-isolation-problem-tp372363.html
I modeled the switch and have identified the source of the problem. There
is a resonance formed between the junction capacity of D12, D14 and the
100uH inductor RFC3. When you add the 12pF cap or a scope probe, all you do
is move it around a little. The easiest way to kill this problem forever is
to replace RFC3 with a 1K resistor. That will introduce an additional
receive path loss of 0.216 dB which is negligable. Try it and let me know
what you see.
Bob
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com