http://elecraft.85.s1.nabble.com/K2-100-DC-power-connector-tp374559p374562.html
You can also use a small flat-blade jeweler's screwdriver from the front.
piece of flat spring steel that locks it in place. Once you get the
by the wire from the rear. I did this successfully this morning twice --
like putting the round peg in the square hole on a psych test.
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]] On Behalf Of James
> T. "Jim" Rogers, W4ATK
> Sent: Saturday, February 12, 2005 9:39 AM
> To: Elecraft Reflector
> Subject: RE: [Elecraft] K2/100 DC power connector
>
>
> There is an extraction tool to do this, supplied with the
> Anderson Power Pole kits. The tool is of thin steel, shaped
> (sort of half moon) to fit around the wire crimped in the
> power pole connector. It slipped in underneath the wire and
> connector releasing the retainer spring inside the plastic
> housing. You could then slide the wire and connector from the
> housing. You could try a stiff thin piece of steel or brass,
> if you can insert it, from the rear (wire side), in such a
> way to release the retainer, the connector will slide from
> the housing with a gentle tug.
>
> Jim W4ATK
>
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]]On Behalf Of Steve L.
> Sent: Saturday, February 12, 2005 8:56 AM
> To:
[hidden email]
> Subject: [Elecraft] K2/100 DC power connector
>
>
> Hey, I'm just about to power-up my fully built K2/100
> mod and... snapped the RED DC power connector onto the
> BLACK wire. This is the external DC power cable &
> connector.
>
> So, is there an easy way to extract the pin from the
> housing to reverse these? I've never seen this
> connector before and it doesn't look friendly to mods.
>
> 73, Steve N4SL
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - 250MB free storage. Do more. Manage less.
>
http://info.mail.yahoo.com/mail_250> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):