Posted by
Roger Stein-2 on
Mar 21, 2005; 9:35pm
URL: http://elecraft.85.s1.nabble.com/RE-Double-Solder-each-one-tp376024.html
For those who like numbers.....
A basic K2 Rev F manual has a parts count of 857....ah you can see
where this is going!
So, Alan has handled 69,417 parts after completion of #81.
I kept the packaged wire count separate, 47,223 inches or 3,935 feet 3"......!!!
I will let someone else figure the number of actual solder points... (N0SS??)
73
Roger WA7BOC
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]]On Behalf Of Alan
Sent: Monday, March 21, 2005 2:41 PM
To:
[hidden email]
Subject: [Elecraft] Double Solder each one !
Hi all:
I have built 80 K2's and am working on #81 now. I check each component with
a magnifying glass if there is any question, insert it and solder it. Then
I clip the leads, and solder it again. Then inspect each connection. I do
have a problem from time to time, but so far not with my soldering. Usually
my problems are errors in selecting components or a bad component.
73
Alan
W1HYV
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com