Alignment and Test Part 2

Posted by Dave Lowenstein on Apr 02, 2005; 5:13pm
URL: http://elecraft.85.s1.nabble.com/Alignment-and-Test-Part-2-tp376519.html

I am not getting any significant signal input from the antenna and the loss seems to be at D6.  In trying to determine whether D6 is at fault, I'm measuring 7.13 volts on the anode and 7.31 volts on the cathode.  The manual indicates they should be 8.0 and 7.5 volts respectively.  On D7, I'm measuring 7.94 volts on the anode and 7.31 volts on the cathode.  The manual indicates 0.0 (error?) and 7.5 volts respectively.  Before I blame D6 for the loss of signal, is there something else going on here that may be causing the problem?

Thanks,
Dave
N7AF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com