Re: Balun question
Posted by
Vic K2VCO on
Apr 07, 2005; 2:31am
URL: http://elecraft.85.s1.nabble.com/Balun-question-tp376719p376722.html
W3FPR - Don Wilhelm wrote:
> If my calculations are correct, YES you should have a good balun. The
> reactance of the 9 turns is 809 ohms (AL value is 884 mH/1000 turns,
> inductance for 9 turns should be 71.6 uH) which is more than 16 times the
> impedance of an antenna feedline of 50 ohms. Greater than 10 times the line
> impedance is the value I usually use for an effective chokeing action.
I connected the wires on either end together and tried to measure the
common-mode impedance. It exceeded the range of the MFJ meter (650 ohms). So I
guess that theory agrees with practice!
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com