Posted by
Stuart Rohre on
Jun 10, 2005; 10:22pm
URL: http://elecraft.85.s1.nabble.com/Re-K1-KAT1-FD-OCF-dipole-tp379219p379221.html
Don't forget that 3/2 waves in phase doublets, give you gain and a multilobe
advantage for covering more of the country on Field Day. Now I am not
talking the G5RV, but the W5GI with true in phase action along each side.
He also has the Vee beam without a in span phasing line, the D3 Plus. Both
are on his web page, www.W5GI.com. These can be fed with ladder line or 1/4
wave coax stub for one band use.
The 5/8 wave legs of my IDEZ design, (Inverted Double Extended Zepp) gives
you multi lobes and gain, but you have to have a lot of space, and one
support pole. Just make the antenna of your favorite conduit wire 14 ga
insulated, in any color. Each leg is 5/8 wave at lowest band, (160 or
80m).
Feed the center with 450 ohm ladder or 300 ohm line, and go to an external
current balun, then to coax output of your tuner with a one foot jumper or
double male coax plug.
Finally, for Field Day, a low Horizontal loop is easy up, if the legs are
individual wires joined at 3 corners with wire nuts. Make this loop 2
waves on 40m, and it will have respectable gain like a beam on higher bands,
and 3 dB on 40. It can be tuned to 80m as well. It only has to be up 20
feet to have both high and low angle performance. If oriented to have one
side to most of ham population center, you will cover the country well.
Feed it in the corner opposite the direction of most ham population, as the
lobe pattern favors the side opposite feed. Again, 450 ohm ladder, or 300
ohm line feeder any length. (we had 150 feet last year). Same deal,
external balun, on Tee tuner coax output. 4:1 Van Gorden baluns are
efficient and work well.
Stuart
K5KVH
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com