Posted by
JEAN-FRANCOIS MENARD-3 on
Jun 22, 2005; 5:56pm
URL: http://elecraft.85.s1.nabble.com/KPA100-power-on-20m-30m-update-tp379639p379654.html
Did you redo an alignment of the KPA100 after, or you just changed the 2
caps ?
-----Message d'origine-----
De :
[hidden email]
[mailto:
[hidden email]] De la part de Mike Markowski
Envoyé : 22 juin 2005 12:36
Cc : Elecraft Reflector
Objet : Re: [Elecraft] KPA100 power on 20m/30m, update
Vic Rosenthal wrote on 06/22/05 12:22 ET:
> Stewart Baker wrote:
>
>> I had problems with HI CUR on 14 & 18MHz, 3.6 and 3.7 Amps respectively.
>> Changing C80 & C81 cured the problem, and I now have 2.9 and 2.4 Amps
>> drawn.
>
> What value did you change them to?
Apparently, all new kits will use 5600 pF, 5% caps for C80 and C81.
Mike AB3AP
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com