"No-clean" solder.
Posted by
Ken Knecht on
Jun 24, 2005; 7:14pm
URL: http://elecraft.85.s1.nabble.com/No-clean-solder-tp379724.html
In 1999 or so when I purchased K2 #320 the Kester "No-clean' solder was
recommended by Elecraft.
I quote from a April 12 1999 message on the reflector by Wayne N6KR titled
"Correction on Kester solder part numbers"
"Kester actually has two different types of .031" diameter, 2% silver
solder. The Kester part numbers are:
24-7150-8800 is 1.1% flux by weight ("no-clean," or "245" flux)
24-7150-0027 is 3.3% flux by weight (good ol' standard "44" flux)
Then later he says:
I'm leaning towards the -8800 because it should leave less flux residue,..."
Many other posts at this time also recommended the 245 "no-clean". I used
this solder on my kit and it still works.
73 Ken
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/2005
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com