Posted by
Steve Jackson-5 on
Jul 23, 2005; 10:40pm
URL: http://elecraft.85.s1.nabble.com/voltmeter-offset-and-accuracy-in-K2-tp380698.html
NB: this posting is about an Elecraft radio
;-)
* * *
I was thinking about doing two things to my vereable
K2 #0771, as I wait for new Elecraft toys:
... one is to re-jigger the divider resistors to
offset the K2 voltmeter so it reads what my actual
input-port voltage is, rather than the "internal"
voltage
and
...two was changing the TO-220 regulator(s) to some
kind of precision type ... could not remember if it
was the 8V LVDO or the plain-old 7805 type that set
the reference voltage for other measurements. Wasn't
obvious from the schematic, at first.
On the matter of the offset, I suppose that the
voltmeter's ultimate accuracy will be reduced a bit
because a fixed offset won't compensate for the
actual, varying drop through the polarity-protect
diode, as that will vary over the IsubF ... however,
I've switched mine to the newer Schottky type -- and
aren't they V-drop-flatter over the current curve than
the original?
And on the second matter of the regulator precision,
maybe I am mistaken about the availability of
more-accurate TO-220 parts. What is the typical load
that the 8V rail has? I'm guessing a 1 amp regulator
will suffice.
Which regulator was the "critical" voltage unit? It
was the +5v, right?
Steve KZ1X/4
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com