RE: [Elecraft} K60XV Low Voltage in VCO Alignment
Posted by
rabbott on
Oct 06, 2005; 3:27pm
URL: http://elecraft.85.s1.nabble.com/RE-Elecraft-K60XV-Low-Voltage-in-VCO-Alignment-tp382660.html
I experienced the same low voltage problem when I installed the K60XV. I measured just
over .8 volts on the low end and about 1.2 volts on the high end. I checked both C71
and C73 and found them to be the correct value. As the manual seems to suggest, I
increased the voltage on the low end to just over 1 volt. This increased the voltage at
4000 KHz to just over 6.2 volts. Although slightly higher than the K2 manual originally
indicated, this compromise placed all the voltages within the acceptable range of 1 -
7.5 volts. It appears this adjustment is necessary on at least some K60XV installations.
Ralph L. "Larry" Abbott WA3ELQ
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com