K2 internal battery
Posted by
Slater Tubman on
Nov 04, 2005; 5:16pm
URL: http://elecraft.85.s1.nabble.com/K2-internal-battery-tp383406.html
As with most folks, my hindsight is perfect. This applies to the
reading of manuals
I have the K2 internal battery installed and neglected to read that
the switch should be OFF when using outside power. As a result (I
assume) my internal battery voltage is low at about 9.6 volts.
A few days ago I did put the switch in OFF and hoped that the charge
would come back. Not so.
I have a 14.2 volt reading on my power supply plug to the K2.
Any suggestions?
Is it possible that my construction might be at fault?
73 and thanks
Slater VE5OA
Wolseley, SK Canada
K2 - 4519
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com