Re: Loosing VOX setting during power cycle in CW mode

Posted by Guy, K2AV on
URL: http://elecraft.85.s1.nabble.com/Loosing-VOX-setting-during-power-cycle-in-CW-mode-tp3836009p3836047.html

What firmware revision number does "latest" refer to?  Things are moving
fast.  73, Guy.

On Fri, Oct 16, 2009 at 11:00 AM, PA3CW <[hidden email]> wrote:

>
> I posted a question before about this issue, that i notice only after the
> latest firmware update. When VOX is ON in CW and switch the K3 off and on
> again, i loose the VOX setting and have to press the VOX button again to be
> able to transmit in CW. It does not keep the latest setting. This does not
> occur in LSB, where the setting is kept. Is this a known issue?
> Thanks,
> Dick PA3CW
> --
> View this message in context:
> http://n2.nabble.com/Loosing-VOX-setting-during-power-cycle-in-CW-mode-tp3836009p3836009.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html