Re: CW-Pitch 600 Hz or 700 Hz or what?
Posted by
Geoffrey Mackenzie-Kennedy-2 on
Nov 14, 2005; 12:25am
URL: http://elecraft.85.s1.nabble.com/CW-Pitch-600-Hz-or-700-Hz-or-what-tp383635p383644.html
Good Evening Don,
The thoughts that I have had about a variable frequency BFO controlled from
the front panel come from the requirement to be able to change the beat note
of an incoming signal very quickly, such as one might want to do more than
once during a pile up. Under such circumstances there is not the time to run
CAL FIL unfortunately.
73,
Geoff
GM4ESD
Don Wilhelm wrote on Sunday November 13, 2005 at 1147 PM
>
> I would also like to point out that the process of changing the BFO
> frequency in CAL FIL is exactly the same as using a variable BFO control
> (but it only varies while one is setting it).
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com