ATU problem
Posted by
Slater Tubman on
Nov 15, 2005; 12:27am
URL: http://elecraft.85.s1.nabble.com/ATU-problem-tp383709.html
I have been troubleshooting the internal battery on my K2 with a lot
of assistance from Don Wilhelm. So far I have not found the problem,
so I put the top back on the K2 and plugged in to external power. I
have a ladder line-fed dipole on ANT 1 and my triband beam on ANT2.
I have in ATU installed.
When I attempted to tune the rig, I got a Lo P reading. First time I
ever had that.
The ATU manual says that POWER setting is too low. I get the same
result, regardless of the power setting, regardless of the band,
regardless of the antenna.
Is old age getting me, or have I overlooked something very
basic, .... or what?
Any advice will be appreciated.
73
Slater VE5OA
Wolseley, SK Canada
K2 - 4519
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com