RE: ATU problem
Posted by
Don Wilhelm-3 on
Nov 15, 2005; 7:34pm
URL: http://elecraft.85.s1.nabble.com/ATU-problem-tp383709p383710.html
Slater,
By any chance did you forget to plug in the cable that goes to the AUX RF
connector when you put the top cover on the K2? That would cause LoPwr
messages.
73,
Don W3FPR
> -----Original Message-----
>
> I have in ATU installed.
>
> When I attempted to tune the rig, I got a Lo P reading. First time I
> ever had that.
>
> The ATU manual says that POWER setting is too low. I get the same
> result, regardless of the power setting, regardless of the band,
> regardless of the antenna.
>
> Is old age getting me, or have I overlooked something very
> basic, .... or what?
>
> Any advice will be appreciated.
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com