Re: Driving an external amp with base K2

Posted by Gregg R. Lengling on
URL: http://elecraft.85.s1.nabble.com/Driving-an-external-amp-with-base-K2-tp383745p383748.html

Why don't you use a manual keying line instead of using the rf sampling
keying.

Gregg R. Lengling, W9DHI, Un-Retired
K2/100 SN 3075
http://www.milwaukeehdtv.org

----- Original Message -----
From: "Bill Allen" <[hidden email]>
To: <[hidden email]>
Sent: Tuesday, November 15, 2005 1:21 PM
Subject: [Elecraft] Driving an external amp with base K2

>
> I am trying to drive an external amp, 300W amp, with my base QRP K2.  The
> issue I am having is that during SSB mode transmissions, the amp's T/R
> switch often opens and closes between the sylables of some words.  Is
> there an adjustment I can make in the K2 to help lessen this?  Otherwise,
> it seems to working well.  Also, when working with such an amp with CW,
> should it be set for AM mode?
>
> 73,
> Bill - WA5PB
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com