RE: Problem with first test KX1

Posted by Dan Barker on
URL: http://elecraft.85.s1.nabble.com/Problem-with-first-test-KX1-tp383829p383830.html

Looking at the top of the board with the lettering rightside up (U3 on the
right side, notch to it's left), the pins of U3 are:

8765
1234

so pin 6 is the third pin from the left on the top.

I have no comments on the RS DMM other than try the leads both ways (reverse
red and black) and use whichever (top or bottom of board) is easiest to get
to.

Dan / WG4S / K2 #2456

<snip>
By the way, which is pin 6 on U3?
</snip>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com