Posted by
Ron D'Eau Claire-2 on
URL: http://elecraft.85.s1.nabble.com/K2-IF-Alignment-question-tp384013p384015.html
If you look at the signal on Spectrogram or something similar, you'll see
there is a different in the signal-to-noise ratio as you adjust L34 as well.
The best S/N seems to coincide with the very broad peak, however.
I've most often described that peak as "subtle".
Ron AC7AC
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Vic K2VCO
Sent: Thursday, November 24, 2005 9:14 AM
To:
[hidden email]
Cc:
[hidden email]
Subject: Re: [Elecraft] K2 IF Alignment question
[hidden email] wrote:
> Happy Turkey Day to all,
>
> Symptom: In aligning the IF Amp on K2 #5091, I am not hearing any
> signal strength variation when adjusting L34 per the instructions on
> pg. 62. The weak signal near 7000 khz is relatively loud but moving
> the slug doesn't result in any variation that I can hear.
There is very little variation when adjusting L34, but you should notice
it. The peak is usually quite close to the top of the slug's travel.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco _______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com