Re: Somewhat high transmit current K2
Posted by
Lambs, Dick & Judy on
Dec 10, 2005; 4:12am
URL: http://elecraft.85.s1.nabble.com/Somewhat-high-transmit-current-K2-tp384417p384419.html
Don,
After checking out all the leads you suggested, and still coming up
negative, I think your final suggestion of accepting the slightly
higher current makes good sense. Nonetheless, I had fun learning
about the K2 circuits, and I'm now much more adept and confident in
troubleshooting my K2.
Thanks again for your help and the wonderful support you give on this
reflector.
73
Dick, K0KK
On Dec 7, 2005, at 9:13 PM, Don Wilhelm wrote:
>
> Lastly, your 2.8 Amps is only about 10% higher than the norm, so if
> you
> can't find anything that is an easy fix, you may just want to
> accept it as
> is.
>
> 73,
> Don W3FPR
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com