Posted by
Gernot Trautmann on
Dec 21, 2005; 9:57pm
URL: http://elecraft.85.s1.nabble.com/How-can-the-KNB2-be-tested-tp384757p384767.html
Hi Karsten,
My KNB2 worked w/o problems. Since the KNB2 blanks out continuous noise
within certain timing limits you need to test with another source.
To learn more about the KNB2, look here:
http://www.qslnet.de/member/la3za/K2/modAny.html#KNB273
Gernot
DF5RF
PS: You can put me on the EU-Elecrafters list: K2 #2328.
Karsten Eppert(DK4AS) wrote:
> I have the KNB2 built and installed. I can turn it on/off, set the
> theshold....everything.
> On 40m , with low threshold, I get "ghost"-signals. The manual
> recommends to spend an additional capacitor. OK.
> But what I expect - the blanking of noise - does not happen at all. As I
> have no Noise-source, I tried to switch workspace-lamps on and off. That
> gives me beautiful strong clicks in the receiver. Unfortunately I have
> the same strong clicks when the KNB2 is activated. Nothing is blanked.
>
> Is there a way to test the KNB2? Anything that can be measured? Do I
> need a different noise-source?
> 73
> Karsten
> K2 #4764
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com