Posted by
Steve Kavanagh on
Dec 29, 2005; 3:46pm
URL: http://elecraft.85.s1.nabble.com/K2-100-AM-MW-Broadcast-Intermods-on-80m-tp384927p384929.html
As far as I can see from the manual, the KPA100 T-R
switch is bypassed in QRP mode. As the intermods
occur in both QRP and high power modes the KPA100 T-R
switch can not be the only culprit. With more careful
observations I see that there are fairly small changes
in the S-meter readings on the intermod products (on
the order of one S-unit) when I switch between QRP and
high-power modes, so the high power T-R circuitry may
not be completely off the hook either.
As a matter of interest, I measured the composite
input voltage from the antenna with an oscilloscope
today; it is around 1.5 volts peak-to-peak. Not an
insignificant signal environment to deal with !
73,
Steve VE3SMA
--- Vic K2VCO <
[hidden email]> wrote:
> The t/r switch is used whether or
> not the KPA100 is activated.
__________________________________________________________
Find your next car at
http://autos.yahoo.ca_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com