power output of K2
Posted by
Ian Stirling, G4ICV, AB2GR on
Feb 21, 2006; 6:25pm
URL: http://elecraft.85.s1.nabble.com/power-output-of-K2-tp386845.html
I haven't been too happy with the power output
of my K2, but I didn't know if my vintage 1979
Heathkit power meter is reading low.
Today, I used an oscilloscope and measured
70.4 Volts peak to peak at 1.817 MHz into a
50 ohm dummy load with the meter indicating just
under 10 Watts.
I trust the calibration of the 'scope more than
the meter.
That 70.4 Volts peak to peak is 12.4 Watts;
my Heathkit meter is reading low.
Ian, G4ICV, AB2GR, K2 #4962
--
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com